Wrinkle control is an important requirement in lightweight tissue paper manufacturing and converting. Tissue paper is relatively thin and delicate, making it sensitive to uneven tension, moisture variation, roller misalignment, and improper web handling.
When wrinkles develop during production, they can cause unstable winding, folding defects, web breaks, reduced production efficiency, and increased material waste.
A suitable spreader roll can help improve web flatness by creating an outward spreading effect across the paper width.
For many lightweight tissue applications, a segmented bowed spreader roll with carefully controlled bow geometry and a suitable low-damage contact surface is a strong option to evaluate.
However, the best design depends on the actual wrinkle pattern, tissue properties, machine speed, operating tension, and installation arrangement. Selecting the correct spreader roll requires understanding both the mechanical design and the web-handling process.
Lightweight tissue paper is particularly sensitive to variations in cross-direction tension.
When different sections of a paper web experience unequal tension, local areas may become slack while other areas remain stretched. This creates conditions in which the web can buckle and form wrinkles.
Several operating conditions can contribute to this problem.
Uneven cross-direction tension
Differences between center and edge tension are a common source of web instability. A loose center can create center wrinkles, while loose edges may produce edge waves or folds.
Machine-direction tension problems
Excessive tension can stretch delicate tissue and increase the risk of breaks. Insufficient or unstable tension can allow slack regions to develop.
The relationship between machine-direction tension and cross-direction spreading must be considered during roller selection.
Moisture profile variation
Tissue paper is sensitive to moisture changes. Uneven moisture distribution can result in differences in dimensional behavior and local web tension.
Roller alignment and deflection
Misaligned rollers, excessive deflection, worn bearings, and surface contamination can contribute to uneven web contact.
Incorrect spreading roller adjustment
A spreader roll with inappropriate bow geometry, wrap angle, or installation direction may provide insufficient spreading or introduce additional stress.
Therefore, wrinkle removal should begin with a systematic inspection of the complete web-handling system.
Different spreader roll designs create different web-spreading effects. Their suitability depends on the material, operating conditions, and required level of control.
Segmented bowed spreader rolls
Segmented bowed spreader rolls are widely used in paper and web-handling applications.
The typical construction consists of a curved supporting shaft or tube and multiple rotating segments arranged across the working width.
As the web contacts the roll, the curved geometry creates outward movement toward the edges. This helps redistribute cross-direction tension and reduce local slack.
For lightweight tissue paper, important design considerations include:
Low rotational inertia.
Smooth rotation of individual segments.
Suitable sleeve material.
Controlled bow geometry.
Appropriate surface friction.
Uniform contact across the working width.
Reliable shaft and bearing construction.
The main advantage is the ability to configure the spreading action according to the application.
A fixed-bow design may be suitable for stable production conditions. An adjustable-bow design may be more useful when tissue grades, web widths, or operating conditions change.
Lamellar spreader rolls
Lamellar spreader rolls use flexible surface elements arranged to influence the web across its width.
Depending on their construction, they can provide a controlled spreading effect and may be suitable for applications where delicate web handling is important.
Their effectiveness must be assessed using the actual tissue grade and operating conditions.
Helical-grooved rollers
Helical-grooved rollers use specially arranged surface grooves.
They may be considered for selected web-handling applications, but the presence of grooves does not automatically guarantee an effective spreading force.
Their performance depends on surface geometry, friction, web tension, and contact conditions.
Crowned and concave rollers
Crowned or concave rollers may help with particular wrinkle patterns, especially where the web exhibits center slackness.
However, their effect depends on the complete tension distribution and should be verified under operating conditions.
Selecting the right roller requires collecting relevant production information.
Tissue basis weight and mechanical properties
Basis weight is an important starting point, but it should not be used alone.
Also consider tissue strength, thickness, elongation, web condition, and sensitivity to surface contact.
Working width and roll dimensions
Provide the effective working width, overall length, roll diameter, and installation space.
These dimensions influence the roller geometry and spreading behavior.
Machine speed and web tension
Normal and maximum operating speed should be identified.
The tension range should also be provided, including any known fluctuations or differences across the width.
Wrinkle location and pattern
Determine whether wrinkles appear:
In the center of the web.
Near the edges.
Across the entire working width.
At a fixed machine position.
Only at particular speeds or tissue grades.
This information helps distinguish between a spreading problem and other process-related defects.
Wrap angle and roller position
The web contact arc influences the spreading action. The distance between the spreader roll and the next roller is also important because the web may relax after leaving the spreading surface.
The roller should therefore be selected together with its installation geometry rather than as an isolated component.
HUATAO provides industrial roller solutions for paper, film, textile, and other web-handling applications.
The HUATAO Spread Roll is a relevant product for customers looking to improve web spreading and reduce wrinkles.
Depending on the project, customization can be evaluated around:
Roll diameter.
Effective working length.
Curved shaft configuration.
Bow geometry.
Segment construction.
Surface material.
Rubber sleeve characteristics.
Shaft-end dimensions.
Operating speed.
Installation requirements.
For lightweight tissue, the design review should focus particularly on controlled spreading action, smooth contact, segment rotation, and avoiding excessive lateral stress.
A suitable spreader roll should work with the existing tension-control system, guide rollers, and machine layout.
Customers can also visit HUATAO Rolls and About HUATAO to learn more about the company and its industrial roller business.
For additional technical information, visit the HUATAO News Center.
Q1. Which spreader roll design is best for lightweight tissue paper?
A segmented bowed spreader roll is a strong starting choice for many lightweight tissue applications. Its curved structure produces outward spreading action, while segmented rotating sleeves accommodate the web contact. The final design should be confirmed using tissue properties, machine speed, tension, and wrinkle location.
Q2. Why does lightweight tissue develop wrinkles more easily than heavier paper?
Lightweight tissue generally has lower basis weight and limited resistance to local deformation. Consequently, small variations in tension, moisture, and roller alignment can cause visible wrinkles and folds.
Q3. Can a segmented bowed roll eliminate center and edge wrinkles?
It can help address wrinkles associated with uneven cross-direction tension, but the spreading direction and intensity must match the wrinkle pattern. Center wrinkles and edge wrinkles may require different adjustment strategies.
Q4. Is an adjustable-bow spreader better than a fixed-bow spreader?
An adjustable-bow design offers greater flexibility when production conditions change. A fixed-bow design may be suitable for stable applications where the required spreading geometry is already established.
Q5. Can excessive spreading damage tissue paper?
Yes. Excessive lateral stress, unsuitable surface friction, incorrect wrap angle, or poor alignment can contribute to edge stretching, marking, and web breaks. The objective is controlled spreading rather than maximum spreading force.
Q6. Does roller diameter affect spreading performance?
Yes. Diameter influences the web path, contact geometry, rotational characteristics, and available installation space. It should be evaluated together with bow geometry and wrap angle.
Q7. Why is the distance to the next roller important?
The web may relax after leaving the spreader roll. If the following roller is too far away, some of the spreading effect may disappear before the web reaches the next critical process stage.
Q8. Are helical-grooved rollers suitable for tissue applications?
They may be suitable for particular applications, but their effectiveness depends on the groove configuration and actual web interaction. They should not automatically replace a bowed spreader roll.
Q9. What causes a spreader roll to perform poorly?
Common possibilities include incorrect bow orientation, insufficient wrap angle, excessive contact, unsuitable surface characteristics, segment rotation problems, poor alignment, and an incorrect installation position.
Q10. What information is needed for a customized spreader roll quotation?
Provide the tissue basis weight, working width, machine speed, operating tension, roll diameter, installation dimensions, wrinkle location, existing roll drawing, and photographs of the problem. Also identify the desired surface material and any special maintenance requirements.
Conclusion
For lightweight tissue paper, a segmented bowed spreader roll with carefully selected geometry and a suitable contact surface is an effective design option to evaluate for wrinkle reduction.
Nevertheless, the roller cannot be selected independently of the production process. Tissue properties, tension distribution, moisture profile, roller alignment, wrap angle, and installation distance all influence the result.
The best solution is a customized spreader roll designed around the actual tissue machine and operating conditions.
Related Product and Resources
Contact HUATAO
Tony Liu | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/
HUATAO warmly welcomes tissue paper manufacturers, paper mills, converting companies, and industrial customers worldwide to discuss customized spreader roll solutions.
can not be empty
can not be empty